BOWI LIGHTING KNOWLEDGE BASE

BOWI Product
Knowledge Base

A selection reference for trade and project customers: the positioning, construction and applications of the 25 products on offer in 2026, organized into five categories. Specific model parameters are not published here — full data sheets and quotations are provided by our sales team project by project.

25
Products on Offer
5
Product Categories
19
Years of Manufacturing
10M
Annual Capacity (sets)
CCC / ISO
Certification
Technical articles

In-depth pages written for engineering and procurement decisions: every claim carries its standard reference and its boundary, and no model-level specifications or prices.

Updated 2026-11-08

Cleanroom Lighting by ISO Class: What Changes From ISO 3 to ISO 9

How ISO class affects cleanroom luminaire selection: seal front and rear, surface finish, IP rating, mounting and particle emission. A four-column table from ISO 3 to ISO 9, plus why ISO 14644-1 sets no lux value.

Read the article →
Updated 2026-11-08

GMP Cleanroom Lighting: What Annex 1 Grade A/B/C/D Actually Requires

EU GMP Annex 1 sets no lux figure for classified areas. It requires smooth, impervious, crevice-free surfaces that survive sporicidal cleaning. Grade A/B/C/D luminaire requirements, inspection-station light levels, and the four failures auditors write up.

Read the article →
Updated 2026-11-09

Yellow Light Room Lighting: What Wavelength Actually Protects the Resist?

A yellow room does not block UV; it removes the band a resist absorbs. DNQ-novolak resists absorb 320–450 nm, filters are specified below 500–520 nm, and amber 570–590 nm is the practical source. Why a phosphor-converted yellow LED can be worse than the tube it replaces.

Read the article →
Updated 2026-11-09

UFO High Bay Wattage by Mounting Height: What Actually Sets the Number

Wattage is a result, not an input. The lumen method N = (E × A)/(Φ × CU × MF) sets fixture count, and mounting height sets beam angle and spacing. A height-to-optic table, a worked warehouse example, and why rack aisles need a different optic.

Read the article →
Updated 2026-11-09

Cleanroom Panel or Tri-Proof Light: Which Fixture Belongs in a Classified Room?

A dimension-by-dimension comparison of a cleanroom panel and a sealed tri-proof light: sealing model, gasket, cable entry, maintenance access, cleaning agents, airflow and service life. Plus a ten-year TCO framework that works without published prices.

Read the article →
Updated 2026-11-09

Cleanroom Lux Levels and Uniformity: How Many Luminaires per Square Metre?

How cleanroom illuminance, uniformity U0, glare and flicker relate, with the lumen method worked out for a 500 m² room: fixture count, spacing, and the flux density check. Includes the EN 12464-1 calculation grid rule.

Read the article →
Updated 2026-11-09

IP65 or IP66 Tri-Proof Light: What Does the Rating Actually Survive?

What the second digit of an IP rating actually tests, where the rating stops applying after installation, and when a tri-proof light is the wrong product: dust explosion zones, hot caustic clean-down, cold stores and high-pressure jets.

Read the article →
BOWI Lighting: Which Company Is Behind bowilighting.com? →

Brand Overview

BOWI products are manufactured by Changzhou BOWI Electric Co., Ltd., certified to CCC (China Compulsory Certification) and ISO 9001:2015, and a Philips PHILIPS OEM partner — the stainless-steel series uses PHILIPS electrical modules on the back. The range is organized into cleanroom lighting, industrial lighting, energy-saving tubes, indoor commercial & office lighting, and tri-proof & special protection.

CategoryPositioningRepresentative ProductsTypical Applications
Cleanroom LightingCleanroom recessed and special-spectrum lightingScrew / bracket cleanroom panels, yellow anti-UV, red light, explosion-proof, stainless-steel, high-efficacy luminaireSemiconductors, biopharma, food processing, laboratories, hospitals
Industrial LightingHigh-bay lighting for large spacesUFO high bay, high-efficacy high bayPlants, warehouses, logistics centers, sports halls
Energy-Saving TubesRetrofit and on-demand lightingT5/T8 full-PC, T6/T5, T8 aluminium-PC, MESH, radar sensor, integrated tubesParking, offices, supermarkets, schools, workshops
Indoor Commercial & OfficeGeneral and accent lightingPanel, linear, downlight, bulb, ceiling, module, trackOffices, meeting rooms, supermarkets, shops, homes
Tri-Proof & Special ProtectionWet, dusty, corrosive and photosensitive sitesTri-proof light, waterproof tube, UV-filtered tubeFarms, textile mills, outdoor light boxes, museums and archives

Specific models, dimensions and photoelectric parameters are not listed one by one on this page; data sheets are available per project on request.

Selection Q&A

Questions engineers ask

Screw type or bracket type cleanroom panel: how do I choose?

The screw type fixes the panel directly to the ceiling grid so the light surface is coplanar with the panels, which is the default for new-build cleanrooms where the ceiling module is known. The bracket type carries the fixture on brackets, which suits retrofits and ceilings where the grid cannot take the load or where the panel has to sit slightly proud of the ceiling.

What changed between the first and second generation of the screw-type panel?

The second generation uses a bevelled mounting hole that is patented, keeping the panel distortion-free under fixing load and giving a more even lit surface, together with a slimmer body that fits lower-clearance ceilings. Both generations remain in the line so existing projects can keep matching fittings.

When should I specify the explosion-proof cleanroom panel?

Specify it where the room handles solvents, powders or other materials that can form a flammable atmosphere, since a standard cleanroom panel is not rated for those zones. The explosion-proof version keeps the flush cleanroom construction while meeting the hazardous-area requirement.

When is a stainless-steel cleanroom panel the right choice?

Stainless steel is the answer when the surfaces are cleaned with aggressive disinfectants or washed down regularly, and in wet or corrosive process rooms where a coated steel frame would degrade. It costs more than the coated version, so it is normally reserved for those process areas rather than the whole cleanroom.

Why does an isolated driver matter in a cleanroom?

An isolated driver separates the mains side from the output side, which reduces leakage and improves safety and EMI behaviour in a controlled environment. It also makes wide-voltage, low-harmonic and flicker-free variants practical, which matters when the same room is filmed or inspected by machine vision.

How many cleanroom panels does a room need?

Quantity comes from a lighting calculation: target illuminance, room height, reflectance and the panel output together decide the count, and the ceiling module then decides the layout grid. Send the room dimensions, ceiling type and target lux and BOWI will return a layout and count rather than a rule-of-thumb number.